glass door. Monday , February 26th , 2018 - 14:15:18 PM
Glass doors are a great choice for both homes and businesses, and offer a great many advantages. In this article I′m going to look at specifically what those advantages are, as well as covering possible disadvantages which you should be aware of. One of the most obvious and appealing benefits of doors made from glass is the fact that they allow light to pass through. For doors which open to the outside there is the benefit of being able to enjoy natural sunlight entering the room. Not only does this sunlight look and feel much more pleasant than artificial light, but it also helps to reduce the need for that artificial lighting, lowering costs as well as representing a greener alternative.
The number 1 reason why your sliding glass door won′t side is because too much dirt and debris have clogged up the wheels and the track of your door panel. This is not a hard fix, but because most sliding glass doors are quite heavy, it is best if you have another person present to help you. The first step is to examine how your sliding glass door is fixed to the track. The majority of sliding glass doors have a strip that runs along the top of the frame that holds the doors in vertical alignment, positioning the wheels to fit neatly over the sliding track. To begin, let′s use a simple screwdriver to remove that strip at the top. Once the strip is removed, slowly tilt the door out of the frame, then remove it out of the frame all-together. Turn the door on its side and examine the wheels at the bottom of the door. Remember, some sliding glass doors can be upwards of 90 pounds, so either acquire some help or be very confident in your physical ability.
Your first step is to remove the the old handle and then clean the area from which you removed it. If glue or any other type of adhesive was used on the old one, make sure that any remaining matter is scraped off to allow the new door handle to be installed as smooth as possible. Next, make sure that the holes on the door itself are of equal distance with the holes on the new glass handle. If the holes match, proceed to drill in the screws. If new ones need to be drilled, mark the surface with a pencil where you wish to place the new screws. If you are installing a glass handle that does not require screws, you may use an adhesive to install the new handle. Make sure that that you use a strong water proof adhesive that will withstand heat and steam. After you′ve applied the adhesive and have installed the new glass handle, do not use the handle for several hours until the handle is firmly secured.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does youdopia claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.