glass door. Monday , February 26th , 2018 - 14:00:39 PM
The number 1 reason why your sliding glass door won′t side is because too much dirt and debris have clogged up the wheels and the track of your door panel. This is not a hard fix, but because most sliding glass doors are quite heavy, it is best if you have another person present to help you. The first step is to examine how your sliding glass door is fixed to the track. The majority of sliding glass doors have a strip that runs along the top of the frame that holds the doors in vertical alignment, positioning the wheels to fit neatly over the sliding track. To begin, let′s use a simple screwdriver to remove that strip at the top. Once the strip is removed, slowly tilt the door out of the frame, then remove it out of the frame all-together. Turn the door on its side and examine the wheels at the bottom of the door. Remember, some sliding glass doors can be upwards of 90 pounds, so either acquire some help or be very confident in your physical ability.
When it comes to keeping your house in tip-top shape, nothing can be more annoying than a sliding glass door that won′t slide. After all, what′s the purpose of having a beautiful glass door that leads out to a picturesque backyard if the darn thing takes three NFL linebackers to slide it open? So having personally experienced such sliding glass door angst, I decided to write this article to inform you on the number 1 reason why your sliding glass door won′t slide - and what you can do about it!
Once the door is on its side, you can closely examine the wheels and the track. Most commonly, you will find the wheels are full of soot and debris, and the track is also likely very dirty. To clean the wheels, use compressed air and needle tip pliers. Be careful to pull every last hair out of the wheel bearings. It is wise to be diligent in this step, so you don′t have to make a habit of this process. Once the wheels are completely clean, spray a little bit of penetrating oil into the wheel bearings, spinning the wheel as you apply the oil. (The best choice for the oil is DuPont′s Teflon non-stick dry film lubricant.) It is equally important to clean the track that the wheels rest on. Use damp paper towels to remove the grit and dirt, and then spray the penetrating oil along the track so it is well-applied. Use a clean paper towel to ensure it is evenly applied.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does youdopia claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.