falentino glass window, 2018-02-26 18:27:11. Design Tip # 1 - When to choose a 4" x 8" x 4" block - Since this block is the skinniest unit it is used either to fill in a window opening where a thin block is needed or to create a curved kitchen or recreation room bar. If you′re looking for a way to jazz up your selection consider sprinkling in some frosted or colored glass blocks as well. It is usually better to try to prefabricated sections using this block because they are difficult to lay using the unit by unit method due to the fact they don′t have much surface area on the 4" side. Design Tip # 2 - When to choose a 6" x 6" x 4" block - This unit is most often used for either new construction or replacement windows. It looks good when it′s paired in larger commercial openings with the 12" x 12" x 4" sized masonry units. It is available in many of the common patterns including Decora, Wave, Argus, Vue, Clear and Iceberg patterns. This block is difficult to use with partition walls because there are not any finishing end, corner or curved blocks that accompany 6" sizes. Design Tip # 3 - When to choose a 6" x 8" x 4" block - This unit size is often an excellent choice when you′re looking to complete a shower stall or enclosure. The reason this block works out well is because the curved glass blocks and many of the finished bull nose end units are manufactured in the 6" x 8" x 4" size. Since this size is not too large it comes in handy when you′re designed a curved walk in shower wall where there is not a lot of depth for the shower base. Design Tip # 4 - When to choose the 8" x 8" x 4" block - The most cost effective block to design your shower, wall or window with is the 8 x 8 x 4 size. Since this unit uses a small number of units per square foot and because the production runs of this size are large their total costs per square foot tend to be the most reasonable. Another reason to consider this size is the end, step down, 45 degree angle, and 90 degree corner blocks are available in this size and in multiple patterns (including Decora, Wave, Icescapes, Iceberg & Clear). Design Tip # 5- When to use 12" x 12" x 4" blocks - The 12" x 12" unit is used primarily for its larger size and mass. This selection is most commonly used in glass block window and wall in-fill projects predominately in the commercial market. Common patterns include Decora, Wave, Argus, Vue, and Clear. Design Tip #6 - Mix up sizes, colors and frosted options for a unique touch- Why be uniform when you can step out with a unique style of your own? Mixing the sizes together provides just the touch that can make a project stand out. It is usually easiest to mix blocks like 6" x 6" with the 12" x 12" units or to mix 4" x 8" blocks with 8" x 8" units. Another option to consider is the use of colored or frosted glass blocks - use a few of them as accents, stripes or as a complete wall or window. Design Tip #7 - If you′re still not sure call the experts - Sometimes it′s easiest and best to call the block experts to design your shower, window or wall project and take any guesswork out of the process. Now that you′re equipped with these sizing tips you′re ready to get moving on your glass block shower wall or window project.
deahandra glass door, 2017-12-10 18:00:46. While you′re at it, clean up all the "mating-edges" of the door. This is where the sliding door meets with any other surface of the door frame. A general rule of thumb is to simply wipe down anything that looks dirty. Remember, even if the dirt is not necessarily in the track itself, it can eventually fall to the track causing your door to require another wipe down. If you notice any mating edges that feel sticky, take a paper towel and spray some oil into it, then wipe the oil onto the sticky surfaces.
betty glass door, 2017-12-15 20:06:07. You want to be sure and order all of the materials you will need to do the job at the same time that you order the replacement door. That way, when the new door comes in 2 to 4 weeks later, you will have everything ready to do the job. In addition to any trim needed, you are also going to need caulk, a roll of R-13 Insulation, liquid nails for the track, 4" deck screws, shims, dust masks, and safety glasses. Once the new door arrives, it will be time to take out the old door. That will be our topic in next week′s article.
falentino glass door, 2017-12-11 18:01:37. When it comes to keeping your house in tip-top shape, nothing can be more annoying than a sliding glass door that won′t slide. After all, what′s the purpose of having a beautiful glass door that leads out to a picturesque backyard if the darn thing takes three NFL linebackers to slide it open? So having personally experienced such sliding glass door angst, I decided to write this article to inform you on the number 1 reason why your sliding glass door won′t slide - and what you can do about it!
betty glass door, 2017-12-09 18:00:02. One of the possible disadvantages of course with glass is that it does not usually permit privacy. Clearly this is why very few bathrooms have doors made from glass! But there is a way in which you can enjoy the benefits of a glass door being able to allow light to pass through it whilst also enjoying a certain amount of privacy. Frosted glass, or even coloured opaque glass can be used for both partitions and doors to create an attractive feature which also provides the privacy required.
betty glass door, 2017-12-14 18:03:23. A similar concept works for glass doors. When a solid door has been installed you are basically saying that your path ends where the door starts. A barricade for anyone who wants to enter has been placed. With a glass door you can see that there is more room on the other side thus adding to the illusion of more space.
alexandria glass door, 2017-12-13 18:02:43. Houses come in different sizes. Some houses are small and some are large. If you are thinking of ideas on how to make your small home seem more spacious you can replace the solid doors with internal glass doors.
falentino glass door, 2017-12-12 18:02:09. Your first step is to remove the the old handle and then clean the area from which you removed it. If glue or any other type of adhesive was used on the old one, make sure that any remaining matter is scraped off to allow the new door handle to be installed as smooth as possible. Next, make sure that the holes on the door itself are of equal distance with the holes on the new glass handle. If the holes match, proceed to drill in the screws. If new ones need to be drilled, mark the surface with a pencil where you wish to place the new screws. If you are installing a glass handle that does not require screws, you may use an adhesive to install the new handle. Make sure that that you use a strong water proof adhesive that will withstand heat and steam. After you′ve applied the adhesive and have installed the new glass handle, do not use the handle for several hours until the handle is firmly secured.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does youdopia claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.