cheryyl glass window, 2018-02-26 19:18:47. Design Tip # 1 - When to choose a 4" x 8" x 4" block - Since this block is the skinniest unit it is used either to fill in a window opening where a thin block is needed or to create a curved kitchen or recreation room bar. If you′re looking for a way to jazz up your selection consider sprinkling in some frosted or colored glass blocks as well. It is usually better to try to prefabricated sections using this block because they are difficult to lay using the unit by unit method due to the fact they don′t have much surface area on the 4" side. Design Tip # 2 - When to choose a 6" x 6" x 4" block - This unit is most often used for either new construction or replacement windows. It looks good when it′s paired in larger commercial openings with the 12" x 12" x 4" sized masonry units. It is available in many of the common patterns including Decora, Wave, Argus, Vue, Clear and Iceberg patterns. This block is difficult to use with partition walls because there are not any finishing end, corner or curved blocks that accompany 6" sizes. Design Tip # 3 - When to choose a 6" x 8" x 4" block - This unit size is often an excellent choice when you′re looking to complete a shower stall or enclosure. The reason this block works out well is because the curved glass blocks and many of the finished bull nose end units are manufactured in the 6" x 8" x 4" size. Since this size is not too large it comes in handy when you′re designed a curved walk in shower wall where there is not a lot of depth for the shower base. Design Tip # 4 - When to choose the 8" x 8" x 4" block - The most cost effective block to design your shower, wall or window with is the 8 x 8 x 4 size. Since this unit uses a small number of units per square foot and because the production runs of this size are large their total costs per square foot tend to be the most reasonable. Another reason to consider this size is the end, step down, 45 degree angle, and 90 degree corner blocks are available in this size and in multiple patterns (including Decora, Wave, Icescapes, Iceberg & Clear). Design Tip # 5- When to use 12" x 12" x 4" blocks - The 12" x 12" unit is used primarily for its larger size and mass. This selection is most commonly used in glass block window and wall in-fill projects predominately in the commercial market. Common patterns include Decora, Wave, Argus, Vue, and Clear. Design Tip #6 - Mix up sizes, colors and frosted options for a unique touch- Why be uniform when you can step out with a unique style of your own? Mixing the sizes together provides just the touch that can make a project stand out. It is usually easiest to mix blocks like 6" x 6" with the 12" x 12" units or to mix 4" x 8" blocks with 8" x 8" units. Another option to consider is the use of colored or frosted glass blocks - use a few of them as accents, stripes or as a complete wall or window. Design Tip #7 - If you′re still not sure call the experts - Sometimes it′s easiest and best to call the block experts to design your shower, window or wall project and take any guesswork out of the process. Now that you′re equipped with these sizing tips you′re ready to get moving on your glass block shower wall or window project.
betty glass door, 2018-02-26 04:20:02. One of the possible disadvantages of course with glass is that it does not usually permit privacy. Clearly this is why very few bathrooms have doors made from glass! But there is a way in which you can enjoy the benefits of a glass door being able to allow light to pass through it whilst also enjoying a certain amount of privacy. Frosted glass, or even coloured opaque glass can be used for both partitions and doors to create an attractive feature which also provides the privacy required.
deahandra glass door, 2018-02-26 04:45:47. When it comes to keeping your house in tip-top shape, nothing can be more annoying than a sliding glass door that won′t slide. After all, what′s the purpose of having a beautiful glass door that leads out to a picturesque backyard if the darn thing takes three NFL linebackers to slide it open? So having personally experienced such sliding glass door angst, I decided to write this article to inform you on the number 1 reason why your sliding glass door won′t slide - and what you can do about it!
falentino glass door, 2018-02-25 16:29:10. Another benefit of glass as a material for use in doors and partitions is that it is incredibly durable and extremely easy to keep clean. Glass does not rust, or corrode, it is not susceptible to woodworm, and it doesn′t collect dust. All that is necessary to keep the glass door or glass partition looking clean and attractive is to give it an occasional wipe with a cloth and some glass cleaner. This is ideal for both businesses and homes.
alexandria glass door, 2018-02-25 16:30:02. After you′ve done all this, reinstall the door. You should notice right away that the door is much easier to slide, and should require significantly less effort. If for any reason the door is still difficult to roll, it is likely one of the following reasons: either your wheels are completely burned out, or your sliding glass door is sitting too high on the track, and is thus hitting the top plate of the door frame. If your wheels are burned out, unfortunately you′ll have to call the manufacture of your sliding glass door and request new wheels. If, on the other hand, your door is hitting the top plate of your door frame, you can adjust this by finding the screw holes at the very bottom of you sliding glass door. On most sliding glass doors, there are two screws which can be turned with either a flathead screwdriver or an alan wrench. Turn to the right to raise the door, or turn to the left to lower the door.
alexandria glass door, 2018-02-26 04:20:36. With a choice of colours and many different types of frameless glass doors, including fixed, hinged, sliding and folding systems, there are many benefits worth considering, both for the home and for business environments.
falentino glass door, 2018-02-26 04:45:03. This article is going to be about replacing an old sliding glass door with a modern Vinyl frame sliding glass door. If you currently have french doors and you want to replace them with sliding doors, or vise versa, future articles will cover that topic.
cheryyl glass door, 2018-02-26 04:45:29. The first thing we have to do is measure for the replacement door. You want to measure across the bottom, center, and top of the existing door frame to find the narrowest dimension. Start outside and measure at the point where the old door frame stops and the exterior material starts. That material can be stucco, siding, or brick. Measure across in the 3 places: bottom, center, and top. Record the smallest dimension. Then go inside and do the same thing. You want to measure where the frame ends and the drywall, plaster, or sheetrock begins. Take all six measurements, find the narrowest one, and deduct 3/4". That is the width of the new door. Now, when you measure the height, you can do it just on the outside. Measure the left, center, and right side from the ground where the bottom track sits, up to the top where the old frame ends and the exterior material begins. Take the narrowest dimension and deduct 1/2". That is your height of the new door. Then, determine which side the sliding panel should be on. The fixed panel is designated by the letter "O", and the slider is an "X". In most areas of the country, you call it out by looking at the door from outside and reading left to right. So, if you were outside looking at your door, and you want the sliding panel to close to the right wall, you would ask for an "OX". However, because i have recently discovered that not all parts of the country do it this way, my suggestion is to ask the dealer how they read the opening before placing your order.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does youdopia claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.