cheryyl. glass door. February 26th , 2018.
There are many advantages that come with using sliding glass doors to complete interior design projects. They are lightweight, simple to use and require less space for opening and closing. You can also allow a significant amount of sunlight into a room without the drawbacks of experiencing cold, heat or wind. Additionally, glass doors are sturdy and do not need to be replaced often because they are designed to last for years or even decades.
Your first step is to remove the the old handle and then clean the area from which you removed it. If glue or any other type of adhesive was used on the old one, make sure that any remaining matter is scraped off to allow the new door handle to be installed as smooth as possible. Next, make sure that the holes on the door itself are of equal distance with the holes on the new glass handle. If the holes match, proceed to drill in the screws. If new ones need to be drilled, mark the surface with a pencil where you wish to place the new screws. If you are installing a glass handle that does not require screws, you may use an adhesive to install the new handle. Make sure that that you use a strong water proof adhesive that will withstand heat and steam. After you′ve applied the adhesive and have installed the new glass handle, do not use the handle for several hours until the handle is firmly secured.
Poor Energy Efficiency - Usually multi-slide doors are such large openings that they need to be made of aluminum to be able to manufacture such large openings. As you probably know, aluminum isn′t very energy efficient. Also having such large sections of your home being glass will also require more energy to heat and cool as opposed to if there was just wall space there. However, luckily glass is getting more energy efficient all the time, and there are several low-e glasses available that perform surprisingly well.
You want to be sure and order all of the materials you will need to do the job at the same time that you order the replacement door. That way, when the new door comes in 2 to 4 weeks later, you will have everything ready to do the job. In addition to any trim needed, you are also going to need caulk, a roll of R-13 Insulation, liquid nails for the track, 4" deck screws, shims, dust masks, and safety glasses. Once the new door arrives, it will be time to take out the old door. That will be our topic in next week′s article.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does youdopia claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.