cheryyl. glass door. February 26th , 2018.
Glass doors are also a great way of adding natural light into a room without adding more windows. The light reflects through the glass and illuminates the surrounding walls. It′s the same as having windows except the window is in the door. The main factors needed to give your house more space is transparency, light and reflection. Using these three factors you can give your home an affordable make over without having to change it too much. It works perfectly for the person who doesn′t enjoy renovation and building.
Another benefit of glass as a material for use in doors and partitions is that it is incredibly durable and extremely easy to keep clean. Glass does not rust, or corrode, it is not susceptible to woodworm, and it doesn′t collect dust. All that is necessary to keep the glass door or glass partition looking clean and attractive is to give it an occasional wipe with a cloth and some glass cleaner. This is ideal for both businesses and homes.
The first thing we have to do is measure for the replacement door. You want to measure across the bottom, center, and top of the existing door frame to find the narrowest dimension. Start outside and measure at the point where the old door frame stops and the exterior material starts. That material can be stucco, siding, or brick. Measure across in the 3 places: bottom, center, and top. Record the smallest dimension. Then go inside and do the same thing. You want to measure where the frame ends and the drywall, plaster, or sheetrock begins. Take all six measurements, find the narrowest one, and deduct 3/4". That is the width of the new door. Now, when you measure the height, you can do it just on the outside. Measure the left, center, and right side from the ground where the bottom track sits, up to the top where the old frame ends and the exterior material begins. Take the narrowest dimension and deduct 1/2". That is your height of the new door. Then, determine which side the sliding panel should be on. The fixed panel is designated by the letter "O", and the slider is an "X". In most areas of the country, you call it out by looking at the door from outside and reading left to right. So, if you were outside looking at your door, and you want the sliding panel to close to the right wall, you would ask for an "OX". However, because i have recently discovered that not all parts of the country do it this way, my suggestion is to ask the dealer how they read the opening before placing your order.
Difficult to Install - This is one of the projects that I would seriously recommend you hire a licensed contractor to install. Most manufacturers only sell the product as an installed unit because of the difficulty of installing them; they require all installers to be factory trained employees. Even manufacturers that don′t install, usually require vendors to be licensed glaziers.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does youdopia claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.