glass door. Monday , February 26th , 2018 - 04:27:31 AM
While you′re at it, clean up all the "mating-edges" of the door. This is where the sliding door meets with any other surface of the door frame. A general rule of thumb is to simply wipe down anything that looks dirty. Remember, even if the dirt is not necessarily in the track itself, it can eventually fall to the track causing your door to require another wipe down. If you notice any mating edges that feel sticky, take a paper towel and spray some oil into it, then wipe the oil onto the sticky surfaces.
Several sizes of sliding doors are available and can be custom-fitted for your unique project needs. Before you obtain an estimate and place your order, you should measure the space of the area you need to cover. Measure closet openings both horizontally and vertically; measure horizontally across the top and bottom of the closet opening and vertically on each side of the opening.
You want to be sure and order all of the materials you will need to do the job at the same time that you order the replacement door. That way, when the new door comes in 2 to 4 weeks later, you will have everything ready to do the job. In addition to any trim needed, you are also going to need caulk, a roll of R-13 Insulation, liquid nails for the track, 4" deck screws, shims, dust masks, and safety glasses. Once the new door arrives, it will be time to take out the old door. That will be our topic in next week′s article.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does youdopia claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.