glass door. Sunday , February 25th , 2018 - 16:48:44 PM
Difficult for remodeling situations - Most multi-slide doors are designed with pockets and large spanning opening, they can be sometimes difficult to rearrange your existing framing to accommodate what you may be looking for. The home usually needs to be designed with the multi-slide door in mind to accommodate your exact design wishes. However, usually if you′re flexible with the design and configuration, there is usually a way to make it work.
Your first step is to remove the the old handle and then clean the area from which you removed it. If glue or any other type of adhesive was used on the old one, make sure that any remaining matter is scraped off to allow the new door handle to be installed as smooth as possible. Next, make sure that the holes on the door itself are of equal distance with the holes on the new glass handle. If the holes match, proceed to drill in the screws. If new ones need to be drilled, mark the surface with a pencil where you wish to place the new screws. If you are installing a glass handle that does not require screws, you may use an adhesive to install the new handle. Make sure that that you use a strong water proof adhesive that will withstand heat and steam. After you′ve applied the adhesive and have installed the new glass handle, do not use the handle for several hours until the handle is firmly secured.
Modern digital printing now also enables glass doors to be patterned or to have designs added. This is less useful for homes, but for businesses and commercial properties it provides the opportunity to have company logos or other relevant information included on the glass.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does youdopia claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.